When your siding needs work — whether it's a full replacement, storm damage, or a long-overdue upgrade — our Dallas, OR crews show up prepared, price it fairly, and get it done right. No guesswork, no hidden fees.
What separates our Dallas operation from the competition isn't a slogan — it's the fact that every estimate we write is signed by a licensed contractor, every project has a named lead installer accountable for the outcome, and every job site is cleaned before we leave at night.
We work on everything from single-family homes in residential neighborhoods to commercial cladding on multi-family buildings and light industrial structures across OR. If it involves protecting a building's exterior envelope, we have the tools, the certifications, and the track record to handle it properly.
Every Forge Siding project in Dallas, OR comes with a written workmanship warranty. Not a verbal assurance — an actual document with our license number, a defined coverage period, and a clear process for raising any concern after project completion.
Most siding problems start small and quiet — a missed fastener, a failed caulk joint, a crack that looks cosmetic. By the time interior moisture damage appears, the repair scope has usually doubled. Watch for these early signals.
Cracked panels aren't just cosmetic — they're open invitations for moisture infiltration. Any crack that reaches through the panel face needs attention.
Musty smell in exterior-adjacent rooms, soft drywall near windows, or paint bubbling on interior walls all point to moisture infiltration from outside. Don't wait.
Buckled panels rarely fix themselves. The deformation increases with each heat cycle, and the gap at the panel lock grows. This is one of those issues that gets significantly more expensive if ignored.
Exterior paint peeling within two to three years of a repaint is almost always a substrate or back-priming issue. We diagnose the cause before recommending a fix.
Panels that rattle in wind, move when pressed, or show corrosion staining around nailheads need a fastener audit. Corroded fasteners eventually fail completely, and a panel without fasteners is a panel waiting to blow off.
Air leakage through a compromised siding system can account for 10–20% of HVAC load. Addressing the envelope often produces measurable utility savings alongside the repair value.
Our Dallas, OR team handles the full range of residential and commercial cladding work, from single-panel repairs to complete building envelope re-siding.
New siding installation covers everything from the housewrap to the trim: starter strip, flashing at all penetrations, panel installation per manufacturer spec, and finishing trim at corners, windows, and the roofline. We work on new construction alongside GCs and handle full tear-off replacements on existing homes. Our Dallas, OR crews are certified on vinyl, fiber cement, engineered wood, and steel panel systems — and we carry each product's installation manual on every job.
For insurance-related repairs, we produce a detailed damage documentation package — panel-level photos, square footage by elevation, material specifications — formatted for adjuster review. We've worked with every major carrier operating in OR and understand what documentation a claim requires.
Fiber cement carries a 30-year material warranty when installed by a certified contractor — but only when the installation follows manufacturer specifications precisely. Our Dallas crews hold Preferred Contractor status on major fiber cement lines, meaning the full material warranty stays intact for the homeowner.
Property managers and HOA boards working with us get a dedicated project point of contact, building-by-building scheduling, and standardized documentation — including permit records, warranty registrations, and post-project photo files — formatted for HOA board records and reserve fund reporting.
On replacement projects, we replace trim components that are damaged or compromised regardless of the primary panel material — because leaving old, failing trim behind a new siding installation creates the exact problem the new siding was supposed to solve.
Post-storm inspections document hail and wind damage at panel face level — the kind of close-range documentation that insurance adjusters need for a full-scope claim approval. We've helped Dallas, OR homeowners recover adjuster-approved claim settlements that significantly exceeded initial offers, simply by providing specific panel-level evidence instead of general descriptions.
These aren't marketing claims. They're the operational commitments our Dallas, OR clients reference when they recommend us to their neighbors.
Our written estimates don't disappear after the handshake. They become the contract, and the final invoice reflects the estimate scope. If something changes, we issue a written change order before doing additional work.
We don't schedule jobs we can't start within a reasonable window. If our current backlog means a delay, we tell you upfront and give you realistic dates — not optimistic ones.
Our OR contractor license number is provided at first contact. Look it up in the state database before signing anything — we encourage it. We carry current general liability and workers' compensation; certificates are available on request.
A warranty that isn't in writing isn't a warranty. Ours is a document you can file, reference, and enforce.
A crew that leaves a clean site every evening is a crew that respects the property they're working on. Our standard includes daily cleanup as a non-negotiable part of the project schedule.
Every Forge Siding project in Dallas, OR closes with a documentation package: permit records, manufacturer warranty registrations, post-project photos by elevation, and our workmanship warranty. That file is useful for insurance claims, home sales, and HOA records long after the project ends.
No mysteries, no moving goalposts. The same documented process runs on every project we take in OR.
Call our Dallas, OR dispatch line or request a callback. We schedule a free on-site assessment within 24–48 hours, measure every relevant surface, document existing conditions, and note any substrate concerns before quoting.
The estimate is a document, not a handshake. It lists every component — panels, trim, housewrap, fasteners, labor, permit fees — so you know exactly what's included before signing.
Where permits are required in OR, we handle the application, filing fee, and inspection scheduling. Your confirmed start date is put in writing and we communicate proactively if anything changes — you don't have to follow up with us.
The lead installer contacts you each morning to confirm the day's scope and each afternoon to report what was completed. If the inspection uncovers unexpected substrate conditions, you hear about it same-day with a written change order before we touch anything additional.
The walkthrough isn't a formality. If anything isn't right, we note it and fix it before considering the project closed. Our reputation runs on completed projects, not signed contracts.
If our workmanship doesn't meet the standard we committed to in writing, we come back and make it right at no additional charge. That's not a marketing statement — it's the language in our warranty document, signed at project close. Our Dallas, OR clients get a document they can actually reference, not a slogan.
Call +1-844-782-0929 to Get StartedThree bids, three different approaches. Forge Siding was the only contractor who showed up with a moisture meter at the estimate visit and flagged elevated readings behind our north-facing panels before we even discussed product. That kind of diagnostic thoroughness sold us immediately.
Emergency call on a Saturday night after wind blew off eight panels on the back wall. Someone actually answered. Crew was on site Sunday morning, boarded up the exposed section, and had permanent panels installed by Tuesday. I'd been skeptical of "24/7" claims from other contractors — this is what it actually looks like.
I manage a 34-unit HOA community in Dallas, OR. Coordinating siding work across occupied buildings requires planning most contractors don't have. Forge Siding did building-by-building scheduling, communicated directly with residents about staging dates, and completed the project three days ahead of the contracted timeline. Comprehensive documentation delivered before final payment was due.
Fiber cement installation — the back-priming, the fastener schedule documentation, the warranty registration process — was handled exactly as the manufacturer requires. Our close-out package has the Preferred Contractor registration and the complete fastener log. The 30-year warranty is in force.
The crew found rotted sheathing on the west wall during tear-off. Called me immediately, showed me exactly what they found with photos, and gave me the change order before touching anything. The whole process was transparent from start to finish — that's exactly how contractors should handle unexpected conditions.
I verified their license number in the state database before signing. Current, no disciplinary history. That two-minute check told me this was a contractor operating transparently. Everything about the project execution matched that first impression.
Our Dallas-based team handles every project in the service area — meaning the same crew that handles a large commercial contract is available for residential repairs in surrounding communities. Proximity matters for response time, familiarity with local inspectors, and the practical ability to return quickly if any post-project follow-up is needed.
Currently active in: 97338 and surrounding areas
Reach our Dallas dispatch line for fast scheduling, honest pricing, and a crew that actually shows up when they say they will.
📞 Call +1-844-782-0929 — Free Estimate